HOME > PRODUCT > Temperature and Humidity Chamber > Walk-In Type Compound Salt Spr > details

Walk-In Type Compound Salt Spray Test Chamber

  • Product introduction:The compound salt spray test is to simulate the most natural conditions in the accelerated corrosion test. It is simulated in the natural environment: such as salt spray, hot air drying, wetting, low temperature, etc, these conditions can be combined and
Product details

Product introduction


The compound salt spray test is to simulate the most natural conditions in the accelerated corrosion test. It is simulated in the natural environment: such as salt spray, hot air drying, wetting, low temperature, etc, these conditions can be combined and tested in any sequence of cycles, the main tests are for items used in a rapidly changing environment such as auto parts, aviation equipment, building materials, coating electric, electrical machines, etc.


Specifications


Salt spray chamber temperature range :RT~+60℃(adjustable)
Pressure tank temperature:RT~+63℃(adjustable)
Temperature deviation:≤±2℃
Temperature deviation: ≤±2℃ when the temperature inside the test chamber is 50 ° C
Drying test: when the temperature inside the test chamber is 50~70±2°C, the humidity ≤ 30%, ±3%
Wetting test: when the temperature in the test chamber is 40~50±2°C, the humidity ≥ 93%, ±3%
Temperature overshoot:≤3℃
Humidity range:20%~97%
Humidity fluctuation:±3%(no-load)
Temperature fluctuation:±1℃
Temperature uniformity:≤2℃
Heating rate:≥1℃/min(15℃~40℃)
Spraying amount direction:free direction
Spray pressure:1.00±0.01kgf/cm2
Spraying amount:1.0~2.0ml/80cm2/h(collect 16 hours at least and take the average )
PH:Neutral 6.5~7.2, , Acid 3.0~3.2
Spraying amount viewer:4 pcs
Spraying mode:Airflow spray mode, continuous or intermittent is optional
Internal volume:1m³-4m³-8m³-12m³-16m³-60m³-120m³(Customizable)

  • Last:none
  • next:none
message
contact information:
content:
Verification Code: invisibility?