HOME > PRODUCT > Mechanical Tester > Shock/Drop Measurement System > details
Product introduction
Shock measurement analyzer is specially used as a platform to capture shock wave capture and perform analysis. It is suitable for capturing, measurement and analysis of the normal and high impact event. It can meet ISO, GJB150, GJB360, GJB2423, MIL-STD-810 and other shock test standards and it is a professional tool for environmental shock testing, measurement and analysis.
Specifications
|
Model |
ZH-ST-02 |
ZH-ST-05 |
|
|
Input |
Channel |
2 |
4，can be extended to 8/12/16 |
|
Sampling frequency |
192Hz |
1MHz |
|
|
Voltage range |
-10V~+10V |
||
|
Coupled modes |
AC, DC, ICP; built-in ICP constant current source, charge amplifier (1mV/ and 0.1mV/pc two ranges), compatible with TEDS sensors |
||
|
Output |
Channel |
1个 |
|
|
Bandwidth |
for calibration only |
||
|
Sampling frequency |
192KHz |
||
|
Voltage range |
-10V~+10V |
||
|
General indicators |
Electricity supply |
AC220V |
|
|
Power |
40W |
||
|
Communication interface |
USB2.0 |
||
|
Operating system |
Microsoft Windows 2000/XP |
||
|
Support standards |
ISO,MIL-STD-810, or user defined |
||
|
Other indicators |
ADC Resolution ratio |
24（bit） |
16（bit） |
|
Pulse width |
0.5~100msec |
0.1~100msec |
|
|
Max. acceleration |
5000gn |
100，000gn |
|
|
Dynamic range |
110dB |
80dB |
|
|
Harmonic range |
< -95dB |
< -70dB |
|
|
Signal noise ratio |
> -95dB |
> -70dB |
|
|
Input type |
voltage, charge |
voltage |
|
|
Frequency accuracy |
0.01% |
||
